REPAIR SERVICE NOTES: • Due to the metal type, finish, hosel diameter and hosel length there are limitations on particular models. Please call or e-mail us with your specific application. • * Represents the possibility a grip purchase, grip removal or regrip charge is necessary however not reflected in the price. • All service work including shaft, ferrule and/or grip charges must be paid in advance before work is to begin.   1. Removal of a steel or graphite shaft (de-shaft): With a minimum of 1/4 inch of shaft remaining above the hosel line. $2.50 per club (While you wait) ADDITIONAL CHARGES: A. Please add an additional $5.00 per club with less than 1/4 inch of shaft remaining above the hosel line. br> B. Please add an additional $5.00 per club to safely remove a graphite shaft for reuse. (Waived if damage occurs) NOTES: • Due to the comparable heat range that the epoxy and graphite resin breakdown and/or shaft integrity West Georgia Golf Co. is not responsible for breakage. • The shaft removal charge is waived on all junior irons and woods.   2. *Assembly with a steel shaft (price reflects service only): $7.50 per club (While you wait) *Assembly with a graphite shaft (price reflects service only): $10.00 per club (While you wait) ADDITIONAL CHARGES: A. Please add an additional $2.50 to establish the shaft spline. Note: • Most of the leading aftermarket shaft manufacturers pre-determine shaft spline location which is properly aligned by our service technicians during the re-shaft process at no additional charge. B. Please add an additional $2.50 per club to increase a .355 tip taper to .370 parallel tip. (irons only) C. Please add an additional $1.35 per club for a (.350 reduced to .335) hosel bushing. (woods only) D. Please add an additional $2.50 per club for bore thru models. E. (Callaway (all) drivers & fairway woods) Please add an additional $3.05 per club for the use of a .335 ferrule adaptor. F. Please add an additional $13.25 for a Callaway lie/loft adaptor. (Available only during the re-shaft process with a .335 tip diameter shaft) G. (Ping G5/G10/G15/Rapture drivers & fairway woods) Please add an additional $3.05 per club for the use of a .335 ferrule adaptor. H. Please add an additional $13.25 for a Ping lie/loft adaptor. (Available only during the re-shaft process with a .335 tip diameter shaft) I. (Taylor Made R9 drivers & fairway woods) Please add an additional $32.00 per club for the use of a .335 adjustable adaptor sleeve.(Note these are rarely necessary during the reshaft process however the possibility may exist) J. (Taylor Made Series 5 drivers & fairway woods) Please add an additional $3.05 per club for the use of a .335 ferrule adaptor. K. (Taylor Made Burner/r5/r7 drivers & fairway woods) Please add an additional $3.05 per club for the use of a .335 ferrule adaptor. L. Please add an additional $13.25 for a Taylor Made lie/loft adaptor. (Available only during the re-shaft process with a .335 tip diameter shaft) M. (Titleist 907 driver) Please add an additional $21.50 for the use of a replacement hosel sleeve. (Note these are rarely necessary during the reshaft process however the possibility may exist) N. Please add an additional $2.50 to match a an offset (bend) putter shaft. NOTE: • If see that your specific application is not listed the possibility exist that there are no ferrule adaptor charges however please call should you have any questions. • The installation charge is waived on all junior irons and woods.   3. *Re-epoxy a loose or detached head (steel or graphite shaft): $10.00 per club (While you wait)   4. *Shorten your specific golf club: $2.50 per club (While you wait)   5. *Extension of your specific golf club (includes extension): $4.45 per club in steel and $4.95 in graphite. (While you wait) NOTES: • The maximum additional recommended length is 1 inch with a graphite extension and 2 inches with a steel extension. Any length requested longer than the recommended length is not covered under warranty. • The grip installation charge when combined with an extension is $1.00   6. *Extension removal: $5.00 per club (While you wait) NOTES: • Due to the comparable heat range that the epoxy and graphite resin breakdown the case may arise with a graphite shaft extension where we will simply cut the graphite extension to the desired length and the charge will be $2.50. • The grip installation charge combined with the removal of an extension is $1.00   7. To check and/or adjust the lie of an iron or putter: $2.50 per club (While you wait) NOTES: • Due to the nature of various metals West Georgia Golf Company is not responsible for breakage. • West Georgia Golf Company will attempt a (cold hosel) lie or loft adjustment of more than 2 degrees if requested however this is not recommended.   8 To check and/or adjust the loft of an iron or putter: $2.50 per club (While you wait) NOTES: • Due to the nature of various metals West Georgia Golf Company is not responsible for breakage. • The adjustment of the loft will have direct influence on the bounce of the golf club. • West Georgia Golf Company will attempt a (cold hosel) lie or loft adjustment of more than 2 degrees if requested however this is not recommended.   9. Used grip/grip tape removal and new grip installation (price reflects service only): $2.00 for a standard men's or lady's grip / $4.00 for the Winn 21" or 2 piece putter grip (While you wait) NOTE: • The removal / installation charge is waived on all junior irons and woods.   10 New grip installation only with the used grip and grip tape removed prior by the customer or at the time of new shaft installation (price reflects service only): $1.00 for a standard men's or lady's grip / $2.00 for the Winn 21" or 2 piece putter grip (While you wait). NOTE: • The installation charge is waived on all junior irons and woods.   11. Grip enlargement during the re-gripping process up to 4/32: .50 per 1/32 (While you wait) NOTES: • Due to the nature of WINN and all full cord grips West Georgia Golf Company is able to increase the size only 1/32. • Due to the nature of grips West Georgia Golf Company is not responsible for grip splitting.   12. Grip removal for re-use (available within 30 days of grip installation): $2.50 per club (While you wait) NOTE: • Due to the nature of grips West Georgia Golf Company is not responsible for grip splitting.   13. Balance Certified Golf counter weight of an iron, hybrid iron, driver, fairway metal or putter: $34.95 per club (While you wait) Weight Change Only $29.95 per club (While you wait)   14. Increase swing weight of your specific golf club +/- 2 points with lead tape (included): $2.50 per club (While you wait)   15. *Removal of loose epoxy or metal within the head or shaft: $5.00 per club (While you wait) NOTES: • Price reflects that disassembly is not required • In some cases the loose epoxy or metal cannot be removed and rattle stop must be added to the clubhead.   16. To replace bore thru shaft pins in steel or graphite shafts: $2.50 per club (While you wait) NOTE: • Price reflects that disassembly is not required.   17. To test the frequency or spline placement of a shaft: 2.50 per shaft (While you wait)   18. Removal of light sole scarring: $5.00 per club (1-2 day turnaround) NOTES: • Due to the different metals used in casting, color changes are common in the areas to be buffed. • Due to the nature of carbon steel expect rust to form on all forged irons and wedges in the areas to be buffed. • Some scarring due to the depth cannot be removed, which will be determined at the time service.   19. To custom grind an iron (example: Reducing wedge bounce): $10.00 per club (1-2 day turnaround.) NOTES: • Due to the different metals used in casting, color changes are common in the area to be custom ground. • Due to the nature of carbon steel expect rust to form on all forged irons and wedges in the area to be custom ground.   20. A NEW SERVICE COMING SOON AS OUR PROFESSIONAL SERVICE TECHNICIANS AT WEST GEORGIA GOLF COMPANY HAVE NO OUT OF BOUNDS WHEN IT COMES TO IMPROVING YOUR GAME THROUGH EQUIPMENT ENHANCEMENT: